High Mast Assembly &Straightening Machine
Current position: Home
>
Product
High mast assembly &straightening machine, model: HJZ-1000 (High mast clamping device)
Application:
1. It is mainly suitable for power poles. After bending, two pieces of high pole light poles are assembled by upper and side oil cylinders, and then spot welding is carried out manually to facilitate the next welding process.
2. Straighten the rod after longitudinal welding
3. The welded rod shall be rounded to facilitate flange assembly.
Main technical parameters
No. | Item | Unit | Value |
1 | Model | HJZ-1000 | |
2 | Max, diameter of the pole | mm | 1000 |
3 | Max, thickness of the pole | mm | 10mm |
4 | Working force | KN | 1000 |
5 | Max stroke | Mm | 650 |
6 | Max distance from rod to worktable | Mm | 1150 |
7 | Two-side cylinder output force | KN | 300X2 |
8 | lateral cylinder stroke | mm | 400 |
9 | Movement distance from upper to lower for two-side cylinder | mm | 430 |
10 | Max working pressure | MPa | 25 |
11 | Height above ground of worktable | mm | 305 |
12 | Column inner distance | mm | 1450 |
13 | Total motor power | kW | 18.5+5.5 |
14 | Main part Weight | kg | 4000 |
15 | Main part Overall size | mm | 1300*1900*2400 |
Technical description
1. This machine is a three beam worktable structure. The oil cylinder is installed in the center of the upper beam and runs up and down. The cylinders on both sides are installed on both sides of the main machine. The side cylinders can run up and down.
2. All actions are inching, that is, pressing and holding the corresponding button will result in corresponding action, and releasing it will stop. The cylinders on both sides can act simultaneously or separately.
3. Two sets of supporting wheel devices are installed at the front and rear positions of the machine workbench to facilitate the forward and backward movement of the workpiece.