CNC Pole Shut-Welding Machine

Current position: Home > Product

lamp post close straight seam welder

Lamp pole closing straight seam welding machine: model: 340/6000

Scope of use: suitable for longitudinal automatic welding of large length lamp poles

lamp post close welding machine

This welder is generally suitable for welding polygonal and circular tapered poles. The welder is an automatic welding line, the car is equipped with adjustable speed motor, can pull the lamp pole, from the small head to the big head movement. The hydraulic cylinder drives the pinch roller to tighten the lamp pole through the mechanical chain and sprocket, and welding is carried out at the same time.

The machine consists of the following parts:

1. Long table with tractable trolley rails

2. Trolley part for driving lamp post

3. Hydraulic clamping and welding parts (including 3 sets of pinch rollers, suitable for polygonal shapes such as 8-sided, 6-sided and round poles)

4. Submerged arc welding system with wire feeding system

5. flux recovery system

6. Rear support section

7. hydraulic system

Technical parameters

1	Diameter range of solderable poles	60-340mm
2	Length of solderable pole	6000 mm
3	trolley length	1500 MM
4	Thickness of solderable poles	Light pole diameter: 60~340mm	2.8~4mm
		Light pole diameter: 250~340mm	2.8~8mm
5	Oil pump motor power	4 KW
6	Trolley motor power	4 KW. Variable frequency, adjustable speed
7	welding machine	Lincoln welding machine, DC600
8	wire diameter	1.2,1.6~2mm welding wire, according the pole thickness to do selection Different diameter welding wire can be selected according to the thickness of the lamp pole
9	working speed	1~3m/min Stepless adjustable (Note: different thickness speed will be different)
10	Weights	5000 kg
11	overall size	15000x2800x4200 mm

Includes 8 meters of workbench and 6 meters of back support.